The Crescent CX6PT25 is listed as a 25-piece mechanics tool set built around a 3/8-inch-drive pass-through ratchet and sockets. The listing describes an X6 box-end design intended for several fastener shapes, along with metric and inch sizes. These details are based on the supplied listing and were not independently verified by ToolMaster.
Overview
This set is aimed at general fastening work where a pass-through socket may help accommodate threaded fasteners that extend beyond a conventional socket. The listing also describes a low-profile ratchet and socket arrangement for restricted spaces. The complete package should be checked against the current product information before selecting it for a specific repair or project.
Listed features
Pass-through design
The listed system is intended to work without requiring a separate deep socket for the same fastening task.
X6 fastener coverage
The listing says the sockets can engage hex, square, 12-point, E-Torx, rounded-hex and spline fasteners.
Ratchet access
The ratchet is listed with a 5-degree swing arc and a profile described as up to 50% thinner than standard ratchets.
Included sizes
Listed sizes include 10 through 15 mm, 17 through 19 mm, and inch sizes from 3/8 through 7/8 inch. A 3/8-inch-drive bit adapter socket is also identified.
The listing also claims the ratchet is up to 40% stronger than standard ratchets. ToolMaster has not verified that comparison or the complete piece count.
Who may find it useful
This set may suit a home workshop, vehicle maintenance area or general mechanical toolkit where both metric and inch fasteners are encountered. The pass-through format may be worth considering when protruding studs or limited clearance make ordinary socket arrangements inconvenient.
It may be less suitable when a project requires sizes not listed, a conventional deep-socket assortment, specialized torque-control tools or confirmed compatibility with a particular fastener system.
What to check before choosing
- Confirm the current package contents and how the stated 25 pieces are counted.
- Verify the exact metric and inch sizes supplied.
- Check whether the listed fastener types match the fasteners in your project.
- Confirm that the 3/8-inch drive and pass-through opening suit your existing tools and access requirements.
- Review current manufacturer or seller information for dimensions, operating limits and any updated specifications.
Safety and use considerations
Use the correct socket profile and size for the fastener, keep the tool fully seated, and inspect the ratchet and socket for damage before use. Do not use a ratchet as a substitute for a torque wrench when a specified tightening value is required. Avoid adding improvised extensions or impact tools unless the current product documentation specifically permits that use.
Wear suitable eye protection and keep hands clear of pinch points. If a fastener is seized, use a method and tool rated for that task rather than forcing a small hand tool.
What remains unclear
The supplied listing does not establish the socket material, overall dimensions, case or storage arrangement, torque limits, impact-tool compatibility, warranty terms or safety certification. It also does not independently document the stated strength, thickness or swing-arc comparisons. Confirm these points on the current manufacturer or seller page.
Frequently asked questions
What drive size is listed?
The set is identified as using a 3/8-inch drive.
Which fasteners is the X6 system claimed to fit?
The listing names hex, square, 12-point, E-Torx, rounded hex and spline fasteners.
Does it include metric and inch sizes?
Yes. The supplied listing identifies both metric sizes and inch sizes, though the complete contents should be confirmed.
Can the ratchet reach tight spaces?
The listing describes a 5-degree swing arc and a thinner-than-standard profile. Actual access depends on the fastener location and surrounding clearance.
A practical conclusion
The CX6PT25 may be a useful compact option for mixed metric-and-inch fastening work, especially where a pass-through socket and low-profile ratchet could help. Its suitability depends on the exact contents, fastener coverage and operating limits, so verify the current specifications before relying on it for a particular repair.
Reviews
There are no reviews yet.